LAMI GRP Doors, Non-standard Sizes

The standard door leaf sizes of pressure moulded LAMI GRP doors are detailed in the table shown on the individual data sheets for each door type. Non-standard sizes can be provided by reducing or increasing door leaf height and width or joining door leaves together.

 

The door leaf can be reduced either in height or in width without noticeable loss of the strength.

However it is not recommended to reduce both height and width of the same doorleaf as it may affect its integrity.

Reduced door leaf height

The door leaf height can be reduced at the factory to any requested dimension.
Cut edges are finished to their original standard with no visible seam.

Reduced door leaf width

The door leaf width can be reduced at the factory to any requested dimension. Cut edges are finished to their original standard with no visible seam.

lami_doors_special_sizes.png

lami_doors_special_sizes.png

Increasing door leaf height and width or joining door leaves together is the best applied to the door leaves with a polyurethane core.

A minimal seam is visible on the face of the door, which is fully sealed with matching colour and material. The joints of the fire rated doors or sound insulation doors require additional reinforcement visible to the perimeter of the door leaf.

 

Increased door leaf height

The door leaf height can be increased at the factory to any requested dimension using combinations of the standard and cut door leaf sizes.

 

Increased door leaf width and adjoined door leaves

The door leaf width can be increased at the factory to any requested dimension using combinations fo the standard and cut door leaf sizes. Because the door leaves are lightweight by nature, whole door leaves can be joined together to produce exceptionally wide sliding doors.

lami_doors_special_sizes.png

 

 
 
 

lami_environment2.jpg